The face of the moon was in shadow
Almost before we knew it, we had left the ground. All their equipment and instruments are alive.Mist enveloped the ship three hours out from port. The spectacle before us was indeed sublime.A red flair silhouetted the jagged edge of a wing.
Commercial Plywood · BWR & MR
Commercial plywood for furniture and fit-out that stays flat.
Hardwood-core boards for joinery, cabinetry and interiors — boiling-water-resistant where it gets humid, moisture-resistant where it stays dry. Shipped FOB Cochin, the same grade every order.
Specification
Two grades, one standard of build.
BWR grade — boiling-water-resistant
| Standard | IS 303 BWR |
|---|---|
| Bonding | Melamine-fortified UF / phenolic glue line |
| Face veneers | Gurjan / keruing hardwood |
| Thickness | 6 – 25 mm |
| Best for | Kitchens, bathrooms, humid and semi-exterior interiors |
MR grade — moisture-resistant (commercial)
| Standard | IS 303 MR |
|---|---|
| Bonding | Urea-formaldehyde glue line |
| Core | Hardwood / mixed hardwood, gap-free |
| Thickness | 4 – 25 mm |
| Best for | Dry interiors, furniture, panelling, cabinetry |
Panel size 1220 × 2440 mm and custom cut-to-size. Supplied by the container load, FOB Cochin. Send grade, thickness and volume for a written quote within one business day.
Why our commercial ply
Furniture-grade means flat, gap-free and predictable.
Gap-free hardwood core
Full hardwood veneers with no overlaps or voids — so the panel holds screws and stays flat under a finish.
The grade you ordered
BWR is BWR and MR is MR — bonded to the standard, not relabelled down a grade between orders.
Container loads, FOB Cochin
Recurring supply to furniture clusters, joinery firms and dealers abroad — the same board each shipment.
Questions buyers ask
Commercial plywood, answered.
What is the difference between BWR and MR plywood?
BWR (boiling-water-resistant) uses a fortified glue line for kitchens and humid areas; MR (moisture-resistant) is urea-formaldehyde bonded for dry interiors and furniture. Both are IS 303 commercial grades. IS 710 vs IS 303 explained →
Is commercial plywood waterproof?
No — for constant water you need IS 710 BWP marine plywood. BWR resists occasional wetting; MR handles humidity only.
What thickness and sizes do you supply?
4–25 mm at 1220 × 2440 mm and custom cut-to-size, in BWR and MR grades.
What is the minimum order?
By the container load (FCL), FOB Cochin Port, documentation ready at dispatch.
Commercial plywood
Send the spec. Get a number, not a brochure.
Tell us grade, thickness and volume. The export desk replies within one business day.