Unit 01
Plywood factory
Veneer peeled, dried, hot-pressed and graded — film-faced shuttering, marine, commercial and okoume packing plywood, calibrated panel after panel.
Industries
The industries we serve.
Five sectors. One common requirement: wood that performs as specified — pour after pour, voyage after voyage, season after season.
Five sectors · five continents
Where our wood does its work.
Five sectors served from our Perumbavoor operation — to the spec, on the schedule, container after container. Each one below links straight to the grades it uses.
01 · Construction & Formwork
Panels that strip clean and come back for the next pour.
Civil contractors and formwork suppliers don't buy a sheet — they buy a number of pours. We make high-density film-faced shuttering in the film weights and thicknesses that survive repeat use and strip to a fair face, plus chequered anti-skid board for scaffold platforms and walkways. Sized to your form system, loaded by the container, the same panel each delivery.
Products for this sector
Film-faced shuttering plywoodChequered anti-skid plywoodGuide: cost per pour02 · Marine & Boatbuilding
A bond that holds underwater, a core with no voids.
Boatbuilders and marine fit-out shops need plywood that survives immersion, steam and humidity without delaminating. The IS 710 BWP marine plywood we make is 100% phenolic-bonded on a full hardwood core — BS 1088 grade available on request — for hulls, decks, bulkheads and wet interiors. Boatyards supplied from Perumbavoor, backed by four decades of group manufacturing, cut to the yard's spec.
03 · Joinery & Interiors
Flat, predictable panels that take a finish.
Joinery firms, furniture clusters and interior contractors need the right grade for the right job — and the same board every order. We make commercial plywood in BWR and MR, block board, finger-joint board, particle board and sawn timber, gap-free and machined flat, so cabinets, carcasses and worktops come out true.
04 · Doors & Shutters
Shutters that hang true and hold a hinge.
Developers and door dealers need flush doors that stay flat and take a fixing without blowing out. The block-core flush doors we build come veneered, laminated or PU-finished, in standard residential sizes or bespoke dimensions — finished, crated and loaded for the container.
05 · Export Packaging
Packaging that clears customs and protects the cargo.
Exporters, OEMs and 3PLs crating heavy or engineering goods need packaging built to the cargo, not to a catalogue. We build ISPM-15 pallets, plywood boxes and crates and cable drums to your bill of materials — plus lightweight okoume packing plywood that takes weight, and freight, off every case.
Four units · one name
The industries we own.
Cochin Wood Industries is plural for a reason. Plywood, sawn timber, packing cases and boards each run on a dedicated floor — four units feeding one export desk.
Unit 02
Sawmill
Hardwood logs broken down into sawn timber, runners and battens — sized to the job and seasoned to load, for joinery floors and packing lines alike.
Unit 03
Packing case unit
Boxes, crates, pallets and cable drums built to your bill of materials — heat-treated, ISPM-15 stamped and ready to clear customs.
Unit 04
Wooden board factory
Block board, flush doors, finger-joint and particle board — gap-free cores machined flat, so carcasses and shutters come out true.
Why Cochin Wood
Built to your sector's spec — and your shipping schedule.
Five sectors, one discipline: the right grade, certified for export, shipped on time. Here's what that means in practice.
01
Spec-matched grades
IS 710 BWP for marine, 120 gsm film-faced for formwork, IS 303 BWR for joinery. We quote the grade the job needs — never the nearest substitute.
02
Export-ready as standard
ISPM-15 heat-treated and stamped, phytosanitary certificate, FOB / CIF / CFR from Cochin Port. Your container clears customs without surprises.
03
One export desk
A single point of contact from quote to bill of lading — with a written quote and grade recommendation back within one business day.
Proof
Pour after pour. Voyage after voyage.
A sample of recent shipments from Perumbavoor, by sector.
Concrete Formwork · Jebel Ali, UAE
800 m³ of HD film-faced shuttering
18 mm phenolic-film panels for a Jebel Ali port project, cut to a custom 10′×5′ size.
10 containers · 18 mm film-faced · FOB Cochin
Marine · East Africa
BWP marine ply for a boatyard fleet
IS 710 phenol-formaldehyde bonded ply for hulls and coastal fit-outs.
IS 710 BWP · 12 / 18 mm · FOB Cochin
Export Packaging · Southeast Asia
2,500 pallets and 400 cable drums
ISPM-15 fumigated and stamped, built to the customer's bill of materials.
ISPM-15 stamped · staggered delivery · FOB Cochin
Our operation
From veneer to loaded container.
Tell us your sector
We'll send the right product, the right grade, in writing within one business day.
No call-centre. No chatbot. A real export desk, working from Perumbavoor — same time zone as the people loading your container.