Skip to content
Cochin Wood Industries logoCochin WoodIndustries

Plywood, packaging & timber

The full catalogue.

Find the panel, packing case or timber your work needs.

A flat lay of plywood, timber and surface samples in natural wood tones
SectionsChoose a section

01 / Plywood & boards

Choose the right panel.

Grades for packing, construction, furniture and joinery. Start with the application, then confirm the specification.

Filter:

02 / Packing cases & packaging

Built around your cargo.

Boxes, crates, pallets and cable drums. Discuss the load, dimensions and destination with our desk.

Plywood cases with timber frames and reinforced corners

Plywood Boxes & Crates

Export packing cases and crates, ISPM-15 ready for heavy machinery.

Explore product →
Rows of light-coloured timber and plywood pallets stacked in a room

Plywood Pallets

Two- and four-way ply and timber pallets for freight and storage.

Explore product →
Two empty wooden cable drums with circular plywood flanges

Plywood Cable Drums

IS 10418 flanges and drums for cable, wire and hose reels.

Explore product →

Making your own cases? Explore packing plywood →

03 / Timber

Start with the species.

Six named species and specialty timber enquiries. Species, seasoning, dimensions and quantity are confirmed in the written specification.

Three thick rough-sawn tan planks with their end grain visible

Eucalyptus

Explore sawn timber
Three pale rough-sawn timber planks stacked in a workshop

Rubberwood

Explore sawn timber
Brown rough-sawn timber planks stacked with prominent end grain

Acacia

Explore sawn timber
Long reddish-brown timber planks arranged in an overlapping stack

Mahogany

Explore sawn timber
Long pale rough-sawn timber boards stacked in a workshop

Jackwood

Explore sawn timber
A wide brown timber plank showing pale flecked grain

Silverwood

Explore sawn timber
A fan of upright wood samples in several warm tones beside a window

Specialty timbers

Discuss your species

See sawn timber forms, specifications and ordering details →

Quick comparison

Choose by application.

Use this as a starting point, then confirm the exact grade, thickness, face and tolerance on the written quotation.

Cochin Wood product comparison
Product familySuitable applicationsBond / gradeCore / surfaceThickness choicesImportant limitation
Packing-grade plywoodCases, crates and palletsMR; IS 303 when specifiedRubberwood or eucalyptus hardwood core; Okoume or Gurjan face options6–18 mm typical; 19, 20, 22, 25, 30, 35 and 40 mm available occasionally against orderMinus tolerance; confirm the tolerance on the quote. Not for permanent wet service.
Commercial plywoodDry interiors, furniture and cabinetry; BWR for humid roomsIS 303 MR or BWRHardwood or mixed hardwood core; Gurjan / keruing facesMR 4–25 mm; BWR 6–25 mmChoose BWR for humidity. Marine plywood is a separate product.
Marine plywoodBoatbuilding, hulls, decks and prolonged wet dutyIS 710 BWP; phenol-formaldehyde bondFull hardwood, gap-free core veneers4–25 mmConfirm any BS 1088 requirement and the final construction on the quote.
Film-faced shutteringConcrete formworkIS 303 BWR; phenolic WBPFull-hardwood core; phenolic film both faces12, 15, 18, 21 and 25 mmWorking life depends on handling and edge care; state the pour programme.
Container flooringContainer floors and rolling cargo loadsIICL TB-001; phenol-formaldehyde WBPFull hardwood core; phenolic film and anti-slip wire-mesh surface28 mm (±0.5); 21/27/30 mm by requestMachining follows the container model drawing; verify the model before order.
Chequered anti-skidVehicle and trailer decks, scaffold platforms and walkwaysPhenol-formaldehyde WBPMarine / hardwood core; chequer or wire-mesh phenolic film12–28 mmPattern, edges and final face construction are confirmed per quotation.
Okoume-faced plywoodExport packing faces, painted furniture and joineryMR base to IS 303; BWR base and calibrated options on requestOkoume face; eucalyptus core for the calibrated option6, 8, 12, 15 and 18 mm typical for MR packingOkoume is a face option, not a bond grade. Confirm the base bond and calibration.

Need a tighter tolerance, a calibrated panel or a custom size?

Request a written specification

Start with what you’re making.

Send the application and destination. We’ll help you choose a suitable material.

Help me choose →